Trial Wedge Spreadsheet – How To Engineer http://howtoengineer.com Engineers In Training Wed, 26 Mar 2014 12:24:31 +0000 en-US hourly 1 https://wordpress.org/?v=4.4.14 Trial Wedge Analysis https://howtoengineer.com/trial-wedge-analysis/ https://howtoengineer.com/trial-wedge-analysis/#respond Mon, 22 Oct 2012 00:27:04 +0000 https://howtoengineer.com/?p=352 How To Engineer - Engineers In Training

Trial Wedge Method Update: I will be updating this post or possibly creating a new post that demonstrates a simpler, clearer way to implement the trial wedge method. It should be completed by 2013/2/17. Update: I realized a couple of…

The post Trial Wedge Analysis appeared first on How To Engineer.

]]>
How To Engineer - Engineers In Training

Trial Wedge Method

Update: I will be updating this post or possibly creating a new post that demonstrates a simpler, clearer way to implement the trial wedge method. It should be completed by 2013/2/17.

Update: I realized a couple of algebra errors were made and now the spreadsheet should be functioning correctly. I have verified with Keystone’s Retaining Wall Software “Keywall” (its free upon request). I still have the “CT” equations as well which could be deleted as they are there for comparison. I believe the results are different because I derived my equations with a different geometry. I will also try to post hand calc example as well.

Trial Wedge Method

Trial Wedge Spreadsheet (Use RSF Equations)

Cali T&S Manual 2011

Trial Wedge Method Video (coming soon)

There are many graphical solutions to the trial wedge analysis shown in textbooks however I was not pleased with them. They usually use ‘force polygons’ where you have to find the weight of each soil wedge for all the different failure angles. So given that this is an iterative process I thought excel would be a good tool. It turns out the trig/algebra/geometry is time consuming but I think I have the basics pretty close. Please check carefully for errors as there are many places for them to occur, please let me know what you find.

The calculation is limited to the geometry of which I selected – a flat section behind the wall, and a broken back slope.

However the procedure is applicable to any geometry.  I hope to add the option of a water table elevation in the future.

Trial Wedge Forces

Trial Wedge Forces

Nomenclature:

Geometry:

H = Height of the retaining wall

h0 = Height from the bottom of the wall to h2

h1= Height of the brocken backslope

h2= Height from the top of wall to where the extension of the brocken backslope intersects the wall

h3 = Height from h0 to the intersection of the failure plane and the ground in section 2.

h4 = Height above the top of wall to the top of the broken back slope.

alpha = α = angle of failure plane measured CCW from the horizontal.

beta = β = angle of the broken back slope.

omega = ω = wall battered measured CW from the vertical.

 Forces

Ca = Adhesion

Co = Coheasion

La = Length of adhesion

Lo = Length of cohesion

Ka, Kah, Kav = Active pressure coefficient, horizontal component and vertical component

Pa, Pah, Pav = Active force on retaining wall, horizontal component and vertical component

R, Rh, Rv = Resultant force of soil wedge weight and friction force direction is determined by effective friction angle and magnitude by the weight of the soil, horizontal component and vertical component

delta = δ = wall friction angle (effective friction angle between soil and wall)

phi = φ = effective friction angle of soil

kappa = κ = δ – ω

lambda = λ = α – φ

 

The post Trial Wedge Analysis appeared first on How To Engineer.

]]>
https://howtoengineer.com/trial-wedge-analysis/feed/ 0